• Diploma / Certificate in Electrical, Electronic, Mechatronics, Manufacturing, or related field
• 1–3 years of experience in manufacturing or production environment (electronics/PCBA/data center preferred)
• Basic troubleshooting and technical problem-solving skills
• Able to read technical drawings, BOM, and assembly instructions
• Familiar with hand tools, test equipment, and manufacturing processes
• Willing to work shifts or extended hours during product ramp-up
• Applicant must have a valid passport

• Provide technical support for manufacturing test processes and production lines.
• Ensure MIC setting for new product is correct.
• Verify MO material used per BOM.
• Collaborate with engineers to develop and refine manufacturing processes, to configurate SFCS in MIC.
• To ensure MP MO configuration is correct.
• Identify technical issues during builds and escalate to engineers for resolution.
• Ensure materials, tools, and fixtures are ready before production build.
• Ensure rework routing and configuration is correct.

• Bachelor’s degree in electrical/Electronic Engineering, Mechatronics, Manufacturing Engineering, or related field.
• 2–5 years of experience in manufacturing/test engineering
• Strong troubleshooting and analytical skills.
• Familiar with test equipment, diagnostic tools, and failure analysis techniques.
• Good communication skills and ability to work in cross-functional teams.
• Applicant must have a valid passport

• Provide technical support for manufacturing test processes and production lines.
• Perform failure analysis and root cause investigation on rejected or failed units.
• Drive yield improvement activities and implement corrective/preventive actions (CAPA).
• Develop, maintain, and optimize test procedures, test plans, and work instructions.
• Support NPI (New Product Introduction) builds and ensure smooth product ramp-up.
• Collaborate with cross-functional teams to resolve technical and quality issues.
• Analyze test data and generate reports for management review.
• Work closely with suppliers/vendors for test hardware or fixture improvements.
• Ensure compliance with safety, quality, and company standards.
  For more information about the company, please visit website at https://www.wiwynn.com/
  ALL FREE:

  1) Passport

  2) NBI Clearance

  3) Phase 1 & 2 Medical Examination

  4) Transportation (House to Manila), fixed at a certain amount

  5) Accommodation (Manila), fixed at a certain amount

  6) STRICTLY NO RECRUITMENT FEES

  7) STRICTLY NO PLACEMENT FEE
  ZERO FEE POLICY. RBA COMPANY (FORMERLY EICC)
  Apply with a government-licensed agency. Beware of illegal recruiters
  Work Asia International Recruitment Agency, Inc.

  DMW (POEA) License No. POEA-027-LB-042922-R

• Candidate must possess at least a Diploma or above in Electrical Engineering or any related field
• Minimum 2 years of experienced in manufacturing or production operations with machinery operation and maintenance skills
• Basic knowledge of Microsoft Office (Excel, Word and PowerPoint)
• Good attitude, able to work independently while at the same time a good team player
• Minimum SPM or diploma or equivalent in a related field
• Strong leadership, interpersonal, and communication skills, with the ability to effectively manage and motivate a team
• Ability to address challenges and develop practical solutions to improve production efficiency
• Applicant must have a valid passport

• Assist in analyzing and refining manufacturing processes to increase efficiency and reduce waste.
• Conduct time and motion studies, data collection, and process evaluations to optimize production flow.
• Support the implementation of lean manufacturing principles, Six Sigma, and other continuous improvement methodologies.
• Assist in the design, testing, and modification of production equipment, tools, and workstations.
• Prepare technical reports, charts, and process documentation for review by engineers and management.
• Monitor and address production issues, identifying root causes and recommending solutions.
• Work closely with engineers, technicians, and production staff to enhance productivity and product quality.
• Ensure adherence to workplace safety, industry regulations, and company standards.
• Assist in inventory control, material handling, and equipment layout optimization.
• Aid in the development and training of operators on new or improved processes.

• Candidate must possess at least a Diploma or above in Electrical Engineering, Mechatronics, Automation Technology, or any related field.
• Minimum 2 years of experienced in maintenance automation equipment such as conveyors and robots.
• Proficient in interpreting electrical circuits, wiring diagrams, and mechanical drawings.
• Knowledge in automated control systems including PLC, SCADA, and HMI.
• Skilled in troubleshooting both electrical and mechanical faults quickly.
• Proficient in replacing electrical and mechanical components.
• Experience in installing and integrating conventional machines and/or robotic systems.
• Able to work in a fast-paced manufacturing environment, preferably in PCBA related field.
• Applicant must have a valid passport

• Candidate must possess at least a Diploma or above in Mechanical/Electrical Engineering or any related field
• Minimum 2 years of working experience in a production or manufacturing environment, with hands-on experience operating and maintaining equipment
• Experienced in manufacturing or production operations with machinery operation and maintenance skills
• Basic knowledge of Microsoft Office (Excel, Word and PowerPoint)
• Good attitude, able to work independently while at the same time a good team player
• Applicant must have a valid passport

• Assist in monitoring and analyzing production processes to ensure optimal performance, identifying areas for improvement and helping implement changes as needed
• Provide technical support for identifying, diagnosing, and resolving equipment malfunctions or process inefficiencies in a timely manner
• Work closely with production teams, engineers, and other stakeholders to ensure smooth operations and minimize downtime
• Perform preventive maintenance on equipment, ensuring all machinery is operating within specifications
• Adhere to and enforce compliance with manufacturing Standard Operating Procedures (SOPs) and safety regulations
• Execute any other relevant tasks or duties as assigned by management, as needed

• Candidate must possess at least a Diploma or above in Mechanical/Electrical Engineering or any related field.
• Minimum 2 years of working experience in a production or manufacturing environment, with hands-on experience operating and maintaining equipment.
• Experienced in manufacturing or production operations with machinery operation and maintenance skills.
• Basic knowledge of Microsoft Office (Excel, Word and PowerPoint).
• Good attitude, able to work independently while at the same time a good team player.

• Assist in the preparation of materials, tools, and equipment for operations.
• Support operators in the setup, operation, and maintenance of machinery.
• Monitor the production process to ensure quality standards are met.
• Ensure that safety protocols are followed at all times in the section.
• Perform general housekeeping duties to keep the area clean and organized.
• Help troubleshoot equipment issues and report malfunctions to supervisors or maintenance teams.
• Adhere to and enforce compliance with manufacturing Standard Operating Procedures (SOPs) and safety regulations.
• Execute any other relevant tasks or duties as assigned by management, as needed.

• Fresh graduates is welcome to apply.
• Candidate must possess at least a Professional Certificate (SKM, IKM, etc.), Diploma (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.
• Experienced in trouble shooting or debug related server board will be an added advantage.
• Computer literacy, MS Office Suite.

• Able to use the equipment and tools to run diagnostic and analyze on server mother board and identify the non-good server board such as error code during the debugging process.
• Experience with Test and Measurement equipment such as Oscilloscope, Digital Multi-Meter, Power Supply, Short Locator, network analyzer and reading electronic schematic as well as using diagnostic tool on server board debugging.
• Experience in diagnostic and error code debugging on electronic module (sub assembly and full assembly)
• Reading and interpreting schematic diagrams to use in troubleshooting, debugging, and diagnosing of server mother board.
• To ensure that non good server board are timely resolved and released to production accordingly.
• Understand and practice error code debugging process and flow accordingly.
• Debug WIP inventory control.

• Fresh graduates are welcome to apply.
• Candidate must possess at least a Professional Certificate (SKM, IKM, etc.), Diploma (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.
• Experienced in trouble shooting or debug related server board will be an added advantage.
• Computer literacy, MS Office Suite.

• Experience on server blade integration in sub assembly testing and final system testing.
• Maintaining test equipment, monitoring test performance on functional tester.
• Support engineer on the development of documentation for operational or technical training
• Additional duties as assigned by Supervisor/Engineer.
• Knowledge in Functional Test (FT) and system integration test.
• Responsible for Test yields improvement sub assembly and final assembly.
• Maintaining test records associated with the functional test process.
• Liaise with production to provide on-going technical support on any related testing issues.
• Maintaining spare part list.
• Experience with Test and Measurement equipment such as digital multimeter, oscilloscope, network analyzer, etc.

• Diploma/Certificate in Mechatronics, Electrical, Mechanical, or related field.
• Experience in PCBA manufacturing is a plus
• Basic understanding of PCBA manufacturing processes and quality standards
• Familiarity with quality inspection tools and equipment
• Ability to work independently and respond quickly to equipment breakdowns
• Good communication skills and a safety-first mindset
• Applicant must have a valid passport

• Conduct regular in-process inspections and tests on PCBA products to verify quality and compliance with specifications.
•  Assist in performing FAIs and submit results to the Senior Technician or Quality Engineer for review.
• Identify and report any quality issues or defects found during inspections.
• Accurately document inspection results and quality issues.
• Assist the Technician and Quality Engineer in resolving quality issues.
• Ensure adherence to quality control procedures and standards throughout the manufacturing process.
• Help maintain and calibrate quality inspection tools and equipment.
• Assist in the preparation and performance of internal audits.

• Test Technician
• Failure Analysis Technician
• Industrial Engineering Technician
• QA Technician
• Progress Engineering Support (PSE) Technician
• Production Technician
• Automation Technician

Qualifications:

• Candidates must have at least a Diploma or higher in Engineering or a related field
• Minimum of 1 year of relevant working experience
• Must be willing to work both day and night shifts
• Good attitude; able to work independently and also be a strong team player
• Minimum SPM, Diploma, or equivalent qualification in a related field
• Ability to address challenges and develop practical solutions to improve production efficiency

• Two (2) years contract
• Free Accommodation
• Free Transportation
• Food: Inclusive in the salary
• Free Ticket